Return to list New

[M300S] ※M300S※ [Method of Updating the Latest Firmware]

[Copy link]

69

Threads

115

Posts

1738

Credits

Administrator

Rank: 9Rank: 9Rank: 9

Credits
1738
Post At  9-24-2021 23:47:49  | Show all posts | Read mode
Dear Customer,

This article will tell you how to use the AZDOME APP to connect M300S.
M300S LATEST FIRMWARE VERSION: M300S-DA380-20211027AZDOMELE
If you have firmware already installed as above dates version, then you have the latest firmware. If you have older firmware and need to get the latest firmware update file.

Please make sure to read all the directions before starting to update the firmware and then follow the directions exactly as stated below.

1.Formet Micro-SD card
Please format it in the laptop. (Please NOTE: Make sure to backup your recordings if you need them before formatting the Micro-SD card).

2.Download the Latest Firmware
If your current firmware version is :
M300S-DA380-20210415AZDOMELE
M300S-DA380-20210805AZDOMELE

Please download firmware file in your laptop by clicking on M300S-DA380-20211027AZDOMELE

3.Copy the firmware to Micro-SD Card
Please insert the Micro-SD card to your laptop directly if you have the Micro-SD card slot and Micro-SD-adapter so you can access the Micro-SD card and copy the firmware file named "FW96670A.bin" to it.
NOTE:
-Do NOT create any new folder on the Micro-SD card to save the firmware file. Simply copy and paste the file directly to the Micro-SD card.
-Please make sure that the firmware's file name doesn't get changed. Otherwise, the camera will NOT recognize the firmware update.

M300S Firmware File Saved.png

4.Insert the MicroSD card into Dashcam
Now keep the camera plugged into the power and turned off dashcam. Then, Insert the Micro-SD card with the latest firmware file into the camera.

5.Power on the Dashcam
Press the POWER button once. This will start the firmware update process. You should see the REC indicator blinking RED LED(photo as below) on dashcam which means your M300S is updating the new firmware. Once the firmware is updated, the camera will turn ON automatically and says "WiFi is ON"
NOTE:
-The firmware update may take up to about 30 seconds.
-Make sure the POWER does NOT get disconnected while the firmware is being updated.

M300S RED LED.jpg

6.Format Micro-SD Card
You must delete the firmware file by FORMAT the Micro-SD card after updating, otherwise the dash cam will update again when next power on.
Please download APP name "AZDOME" on Apple Store or Goole Play, connect the dashcam and APP.
Then go to APP settings → Format SD card.

7.Check the Latest Firmware Version
Power on the dashcam again and check the latest firmware version by going into APP Settings → Firmware Version → M300S-DA380-20210805AZDOMELE
Now you have Upgrade your dash camera's firmware successfully.

Thanks for stopping by!
We love hearing from our customers, and we'd love to get your feedback to further improve your experience with us. Let us know how we're doing, or contact our support team (service@azdome.hk) if you need further assistance from us.
Kind regards
Official Website :www.azdomes.com
Share to:
Reply

Use magic Report

Reply post

You have to log in before you can reply Login | Register

Points Rules

Quick Reply To Top Return to the list