Return to list New

[M63] ※M63※ [Method of Updating the Latest Firmware]

[Copy link]








Rank: 9Rank: 9Rank: 9

Post At  7-5-2021 18:12:41  | Show all posts | Read mode
Dear Customer

There are different latest firmware for M63 dash cam from different batches, please check the firmware version in your dash cam first, then download the right latest firmware to update.
-If download the wrong firmware to update, the dash cam screen will go white or striped. You can update the original firmware to solve it.
-Please backup the important files because updating will delete all files.

1. M63-DA380-20220728AZDOME-LE
2. M63-DA380-20220804AZDOME-TE
If you have firmware already installed as above version, then you have the latest firmware. If you have older firmware and need to get the latest firmware update file.

Please make sure to read all the directions before starting to update the firmware and then follow the directions exactly as stated below.
1.Formet Micro-SD card
You can do this by going into the camera's system settings. (Please NOTE: Make sure to backup your recordings if you need them before formatting the Micro-SD card)

2.Check the Current Firmware Version
Go to the dash cam System Settings → Version
M63 Firmware Version.png

3.Download the Latest Firmware
If your current firmware version is

Please download by clicking M63-DA380-20220728AZDOME-LE.
If your current firmware version is

Please download by clicking M63-DA380-20220804AZDOME-TE, this version updates the words on-screen display.

4.Copy the firmware to Micro-SD Card
Please insert the Micro-SD card to your laptop directly if you have the Micro-SD card slot and Micro-SD-adapter so you can access the Micro-SD card and copy the firmware file named "FW96670A.bin" to it.
-DO NOT create any new folder on the Micro-SD card to save the firmware file. Simply copy and paste the file directly to the Micro-SD card.
-DO NOT change the firware file name. Otherwise, the camera will NOT recognize the firmware update.

M63 Firmware File Saved.png

5.Insert the MicroSD card into Dashcam
Now keep the camera plugged into the power and turned off dashcam. Then, Insert the Micro-SD card with the latest firmware file into the camera.

6.Power on the Dashcam
Press the POWER button once. This will start the firmware update process. You should see the blinking BLUE LED on bottom right corner which means your M63 dash camera is updating the new firmware. Once the firmware is updated, the camera will turn ON automatically.
-You will NOT see any activity on the display of the camera. It will stay blank during the firmware update.The firmware update may take up to about 1 minute.
-Make sure the POWER does NOT get disconnected while the firmware is being updated.

M63 LED light.png

7.Format Micro-SD Card
You must delete the firmware file by FORMAT the Micro-SD card after updating, otherwise the dash cam will update again when next power on.
After dash cam power on, please select OK.
M63H Format.png

7.Check the Latest Firmware Version
Power on the dashcam again and check the latest firmware version by going into the camera's System Settings → Version.
Now you have Upgraded your dash camera's firmware successfully.

Thanks for stopping by!
We love hearing from our customers, and we'd love to get your feedback to further improve your experience with us. Let us know how we're doing, or contact our support team ( if you need further assistance from us.
Kind regards
Official Website
Share to:

Use magic Report

Reply post

You have to log in before you can reply Login | Register

Points Rules

Quick Reply To Top Return to the list